Formula-Moto Racing - Impeller application chart

 

How to use this chart

When choosing an impeller, there are a number of critical factors that you should consider. You also need to consider whether your watercraft has been modified to increase its horsepower and overall performance. A Watercraft that has been significantly modified will require a different impeller to an unmodified watercraft, even in circumstances where both watercraft are the same make, model and year.

Bearing this in mind, the chart below has been divided into three different categories:

  • "Stock Engine" indicates that there has been little or no modifications made to your watercraft's motor;
  • "Limited Engine" indicates that some modifications have been made to your watercraft, however these changes have been "bolt on" and have only slightly increased your craft's horsepower; and
  • "Modified Engine" indicates that some "bolt on" modifications have been made to your watercraft, as well as some custom made internal modifications, resulting in a considerable increase in horsepower.

The following chart is intended to be used as a guide only. As always, if you are unsure which category your watercraft falls into, please contact an FMR technician.

Click here to order or enquire about impellers.

POLARIS (1992 - 2004)

Octane 02-04 777 3-bl. Stainless N/A 16/22 140-75 Swirl Contact us Contact us
Freedom 02-04 701 3-bl. Stainless 148 mm 12/17 Swirl 13/18 Swirl 13/18 Swirl* or
14/19 Swirl**
Virage 00-04 701 3-bl. Stainless 148 mm 12/17 Swirl 13/18 Swirl 13/18 Swirl* or
14/19 Swirl**
Virage I 02-04 777 3-bl. Stainless 148 mm 13/18 Swirl 13/18 Swirl* or
14/19 Swirl**
14/19 Swirl
MSX 150 03-04 750 3-bl. Stainless 148 mm Contact us Contact us Contact us
MSX 140 03-04 1192 3-bl. Stainless 148 mm 16/21 Swirl 17/22 Swirl Contact us
MSX 110 03-04 750 3-bl. Stainless 148 mm Contact us Contact us Contact us
Virage 1200 TXI 00-02 1165 3-bl. Stainless 148 mm 16/21 Swirl 17/22 Swirl 17/24 Swirl
Virage 1200 TX 00-02 1165 3-bl. Stainless 148 mm 16/21 Swirl 17/22 Swirl 17/24 Swirl
Genesis i 00-04 1165 3-bl. stainless 148 mm 16/21 SWirl 17/22 Swirl 17/24 Swirl
Genesis DFI 00-01 1165 3-bl. Stainless 148 mm 16/21 Swirl 17/22 Swirl 17/24 Swirl
Pro 1200 00-01 1165 3-bl. Stainless 148 mm 17/24 Swirl 17/25 Swirl 17/26 Swirl
SLTX 96-99 1050 17/25 stainless 148 mm 17/22 Swirl 17/22 Swirl* or
13/24 Super Slim**
17/24 Swirl* or
13/24 Super Slim**
SLT 780 96-97 780 15/20 stainless 148 mm 13/18 Swirl 13/18 or 14/19 Swirl 15/20 to 17/22 Swirl
SLT 750 94-95 750 4-bl. stainless 148 mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl
SLTH 98-99 700 12/17 stainless 148mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl
SLT 700 97 700 12/17 stainless 148 mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl
  96 700 4-bl. stainless 148 mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl
SLXH 98 1050 17/25 stainless 148 mm 17/22 Swirl 17/22 Swirl* or
13/24 Super Slim**
17/24 Swirl* or
13/24 Super Slim**
SL 1050 97 1050 17/25 stainless 148 mm 17/22 Swirl 17/22 Swirl* or
13/24 Super Slim**
17/24 Swirl* or
13/24 Super Slim**
SL 900 96-97 900 17/25 stainless 148 mm 16/21 Swirl 16/21 or 17/22 Swirl 17/24 Swirl* or
13/24 Super Slim**
SLX Pro 785 97-00 785 12/17 stainless 148 mm 12/17 Swirl 12/17 to 13/18 Swirl 13/18 or 14/19 Swirl
SLX 00-01 1165 3-bl. stainless 148 mm 13/26 Super Slim line 14/27 Super Slim line 14/27 Super Slim line
  99 1050 3-bl. stainless 148 mm 13/24 Super Slim line 13/25 Super Slim line 13/26 Super Slim line
  96 785 3-bl. stainless 148 mm 13/18 Swirl 13/18 or 14/19 Swirl 15/20 to 17/22 Swirl
  95 785 4-bl. stainless 148 mm 13/18 Swirl 13/18 or 14/19 Swirl 15/20 to 17/22 Swirl
SL 780 96-97 780 10/20 stainless 148 mm 13/18 Swirl 13/18 or 14/19 Swirl 15/20 to 17/22 Swirl
SLH 98-01 700 12/17 stainless 148 mm 12/17 Swirl 12/17 to 13/18 Swirl 13/18 or 14/19 Swirl
SL 700 DLX 97 700 12/17 stainless 148 mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl
SL 700 97 700 12/17 stainless 148 mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl
  96 700 4-bl. stainless 148 mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl
SL 750 94-95 750 4-bl. stainless 148 mm 13/18 Swirl 13/18 or 14/19 Swirl 15/20 or 16/21 Swirl
  93 750 17/20 stainless 146 mm 15/20 Swirl 15/20 or 16/21 Swirl 16/21 Swirl
SL 650 94-95 650 4-bl. stainless 148 mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl
  93 650 15/18 stainless 146 mm 13/18 Swirl 14/19 Swirl 15/20 Swirl
  92 650 13/15 stainless 146 mm 13/18 Swirl 14/19 Swirl 15/20 Swirl
STD 650 95 650 4-bl. aluminum 148 mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl
Hurricane 96-97 700 12/17 stainless 148 mm 12/17 Swirl 12/17 or 13/18 Swirl 14/19 or 15/20 Swirl

*Suggested for maximum bottom-to-mid range acceleration gains. ** Suggested for maximum top speed gains.

Click here to order or enquire about impellers.

TOP

 

 

© Copyright FMRacing 2006 | Specialists in Personal Watercraft, All Terrain Vehicles and their parts | sales@fmracing.com.au | Help | Map